Product Description :
The latest Slim Tank (Mini ProTank) BCC(Bottom coil changeable) Clearomizer Kit. It is designed to seamlessly work with eGo, eGo-V, eGo Twist, Vision Spinner, iTaste VV and many other batteries This is just as easy to use and refill as any of our basic Clearomizer and we promise your going to fall in love with it. To fill, turn the tank upside down and remove the threaded end cap. Fill the outer portion of the tank (avoid getting e-liquid into the center airflow tube). Screw the head and wick assembly onto the threaded end cap tightly then screw the end cap onto the tank tightly. You can now turn it right side up and check for leaks before using. Gurgling or Leaking can occur if liquid gets into the center airflow tube. To clear this liquid and improve performance remove the tank from the battery and blow through the mouthpiece into a paper towel. The excess liquid will come out of the threaded end of the device. If this happens often you may need to check that all connections are screwed down tightly or replace the head and wick assembly with a new one. The head and wick assembly will sometimes loosen itself when the thread end cap is unscrewed. Always check that it is screwed on tightly before replacing the threaded end cap. Not doing so could result in a leaking or non-working device. You should never run the tank completely dry. Doing so could result in a burnt or damaged wick and can cause leaking. Refill the tank when the liquid level reaches approximately 1/3 full The lifespan of replacement heads can vary quite a bit, but following the above instructions will maximize the lifespan of the coil.
- Replaceable coil head
- Fixed 510 drip tip
- The bottom pin (where it screws into battery/mod) is not spring loaded
- eGo threaded connector
- Compatible with eGo batteries and mods with 510/eGo threading